Standards
CADshift tab, Data panel. Command: CADSHIFTSTANDARDS
Opens the standards and specifications window. Its Drafting standards tab lists the drafting standards the AI checks drawings against: the organisation’s approved ones from cadshift.com, the company’s shared folder, your own, and the built-in ones.
What you can do
- Add from file… adds a CADshift standard (a .json file) to your own list.
- Share with the company moves one of your own standards to the company’s shared folder, so the whole office uses it.
- Send for approval… sends one of your own standards to cadshift.com as a draft. A person approves it there; then every PC of the organisation gets it.
- Refresh asks cadshift.com for the organisation’s approved standards and their templates.
- Remove removes the selected standard, and Open folder shows where the files are.
- Change… chooses the company’s shared folder; Stop sharing stops using it on this PC.
What a standard checks
Besides layers, linetypes, and text and dimension styles, a standard (version 0.6.1 and later) can give:
- Company layers: the company’s own layer for each part CADshift draws. Parts with no entry stay on CADshift’s own layer, and the check names them.
- Plotting: the plot style table every sheet plots with, and the line weight of each pen colour in millimetres.
- Text: text in capitals, with the words allowed as written, and the text heights allowed on the plotted sheet.
- Style values: the values a text or dimension style must have, such as DIMTXT 2.5.
A standard applies to a drawing once it is linked to it, by the drawing’s template or by a fix you apply. Until then the drawing keeps CADshift’s own layers, and the AI tells you the company’s standard is available.
Who can change what
The AI saves the standards it writes in your own list and never changes the company’s or the organisation’s. Review one, then share it or send it for approval yourself. Every change to the shared folder is recorded there with who made it and when.
- Previous
- Data sources
- Next
- Object data