ScanTo3D converts scan data — a polygon mesh from a 3D scanner, or a raw point cloud — into SOLIDWORKS surface and solid geometry. The result is a parametric model you can mate, dimension, and modify like anything else in the vault. What the tool can’t do is magic: the output quality is bounded by mesh quality and the complexity of the original geometry. Organic shapes with tight blends and small radii will fight you. Machined parts with flat faces, cylinders, and cones are what ScanTo3D handles well. ...

Most SolidWorks engineers reach for VBA when they need to automate something. It’s right there in the Tools menu, no build toolchain required, and the macro recorder gives you a starting point for anything the GUI can do. Batch exporting drawings from the PDM vault is exactly this kind of task — repetitive, time-consuming, and automatable. What’s less obvious is where VBA’s limits are, and how to get PDM state awareness without switching to a C# application. ...

Every SOLIDWORKS weldment tutorial starts with “Insert Structural Member” and assumes the profile library is already populated. It never explains where those profiles actually live, what format they use, or what to do when the profile you need isn’t there. If you’re trying to automate weldment creation via a VBA macro, the API reference assumes you already have the profile path, which means you need to know the folder structure before you can write a single line of code. ...

FreeCAD’s PartDesign workbench is the closest equivalent to SolidWorks’ Part environment. It uses a feature-based, parametric modeling approach built on OpenCASCADE Technology (OCCT) — the same geometry kernel that powers CATIA and Salome. If you’re coming from SolidWorks, Inventor, or any history-based modeler, you’ll recognize the concepts but encounter a few structural differences that aren’t obvious from the UI. This guide covers what actually matters for getting productive: the Body container model, how the Sketcher’s constraint system differs from what you’re used to, the core PartDesign features and their underlying OCCT operations, the topological naming problem that plagued earlier versions (and the fix in FreeCAD 1.0), and how to export finished geometry to STEP, DXF, and STL using FreeCAD’s import/export pipeline. ...

A forum thread from 2026-08-06 captures the problem precisely: a user has a manual workflow — roll back to a feature state, show the body, align the view normal to the target face, then do File > Save As DXF. It works. They then try to replicate it in VBA using IPartDoc.ExportToDWG2, pass the same file path, and get either a failed export (False return, no error) or a DXF that contains nothing. No accepted answer exists because the root cause isn’t obvious from the API documentation. ...

The SOLIDWORKS macro recorder is a reasonable starting point for simple geometry operations. Record a sketch, a cut-extrude, a fillet — replay it — it works. But the moment you do anything beyond basic feature creation, the recorder either drops the operation entirely, captures it in a form that cannot be replayed on a different model, or generates so much view-manipulation noise that the useful API calls are buried. The official documentation says “not all commands can be recorded.” That sentence is technically accurate and practically useless. This post covers the specific operations that the recorder silently omits, why each one fails, and the API call you need to write instead. ...

Pack and Go through the UI is fine for a one-off operation. When you’re doing it repeatedly — versioning a drawing before a revision cycle, archiving a job package, moving a drawing to a different project folder with all its references intact — you want a macro that runs Pack and Go, tells you where the new file landed, closes the original, and opens the copy. The SOLIDWORKS API supports all of this via the IPackAndGo interface, but the documentation examples stop at SavePackAndGo and leave the “then open the copy” part as an exercise for the reader. ...

The forum question comes up regularly: how do I get the PDM Convert Task to save PDFs outside the vault? The answers in search results reference SOLIDWORKS PDM 2016-2019 behavior. The mechanism has not fundamentally changed, but two things shifted enough to break older walkthroughs: the Advanced Scripting variable names differ by version, and the Task Host security model tightened in PDM 2021. This post covers the working approach for both PDM Standard and Professional. ...

Fabrication shops that receive DWG files from SolidWorks drawings often expect specific AutoCAD layers — BRASS, STAINLESS_STEEL, ALUMINUM — matching the actual part materials. The native Save As layer mapping table in Document Properties → DXF/DWG Export → Map SolidWorks to DXF/DWG maps entity types to layers, not component materials. There is no UI checkbox that says “use material name as layer.” This post shows the API approach: read each component’s material from the drawing views, create named layers in the drawing document, assign components to those layers, then export to DWG. It covers the key API calls, a complete working VBA macro, and the three edge cases that will silently fail on a naive implementation. ...

A Reddit thread on r/SolidWorks recently asked how to get the title block Description field to pull from the part’s custom properties automatically. The answers ranged from “use a macro” to “you need PDM” to “manually copy it every time.” No one mentioned $PRPSHEET. This syntax has been in SolidWorks for well over a decade. It links a drawing annotation directly to a named custom property on the model, without any macro, without PDM, without add-ins. When the part’s Description property changes, the drawing title block updates on open. If you’re manually typing part numbers, descriptions, and materials into title blocks, or using a macro to copy properties from model to drawing, this is the feature you’re missing. ...